background image

Check for parts online at www.HuntRiversEdge.com or call 800-345-6007

2

Operator's Manual

JUMBO JACK 1-MAN Ladder Stand

INTRODUCTION

Rivers Edge® Treestands are engineered with you the hunter in mind. We appreciate your purchase of one of our world class 

treestands. Follow these few simple instructions and your stand will provide you many years of trouble-free pleasure. Instructions 

should be kept in a safe place and reviewed at least annually. 
If for any reason you have a problem with your product or are missing any parts, DO NOT return to the retailer, contact Rivers 

Edge® Customer Service Department at 800-345-6007 for assistance.

CONTENTS

Introduction/Warranty ..................................................................................................................................................................................................................2
Warnings .........................................................................................................................................................................................................................................3-4
Inspection and Maintenance ......................................................................................................................................................................................................4
Hardware Identification Chart ................................................................................................................................................................................................5-7
Assembly Instructions ............................................................................................................................................................................................................ 8-13
Warnings .......................................................................................................................................................................................................................................... 14
Setup and Use Instructions .................................................................................................................................................................................................15-16
Finished Ladder ............................................................................................................................................................................................................................. 17
Illustrated Parts Breakdown................................................................................................................................................................................................18-19

WARRANTY

RETI offers a one-year warranty for all components of the treestand.  These warranties apply to the original owner with a proof of purchase.  These warranties 

begin on the date of purchase by the first retail consumer and continue for the period specified above.  These warranties apply to products that are not modified, 

abused or used in a manner that deviates from the product’s intended usage.  Minor fading in color is normal and is not covered by warranty.  Any corrosion 

of painted surfaces that occurs as a result of paint being removed or damaged is also not covered by warranty. RETI offers no other warranty expressed or 

implied.  Products for which warranty work has been approved must be sent directly to RETI and performed by RETI. To obtain warranty service and/or 

replacement instructions, you must obtain prior approval from RETI before shipping your package to us by calling our customer service department 

at 800-345-6007 or by writing to: Ardisam, Inc., P.O. Box 755, 1160 Eighth Avenue, Cumberland, WI 54829 for a return material authorization number 

(RMA#). All items must be shipped prepaid. RETI will, at no charge, repair or replace, in RETI’s sole discretion, any product that satisfies the conditions stated 

above. RETI retains the right to change models, specifications and price without notice.

This equipment has been manufactured under strict quality and safety guidelines. As with any equipment of this type, full understanding of the instructions and 

its use is mandatory and imperative for the safety of its user. RETI is not responsible for any damages or injuries sustained due to improper use or modification 

of any of its products, or resulting from any use which deviates from the product’s intended usage. RETI is not responsible for any injuries sustained due to 

failure to read and adhere to the instructions for use. Any misunderstanding or questions regarding the products of their use should be directed to RETI prior to 

any use. All RETI treestands are sold with a full body harness (“Fall Arrest System”) that meets standards recognized by the Treestand Manufacturer’s 

Association (“TMA”). It is the owner's sole responsibility to inspect the product regularly for damage, improper installation, or conditions that could jeopardize 

the ultimate safety of the product. Failure to use or improper use of the provided Fall Arrest System may result in serious injury or death. ALWAYS wear the 

provided Fall Arrest System while using this product.  Owner is responsible to understand and follow product field weight rating and must never 

exceed maximum weight rating. RETI is not responsible for any malfunction or injury resulting from normal wear and tear, damage caused by improper use, 

improper maintenance, negligence or accidents. This product, if used safely as intended, will provide trouble free service for the useful life of the product. We 

hope you will enjoy the quality of our products for years to come, and have a safe hunt.

Summary of Contents for RE658





















Reviews: