Check for parts online at www.HuntRiversEdge.com or call 800-345-6007
10
Operator's Manual
Landmark
™
600 Blind
DETAIL B
49
56
DETAIL C
36
STEP 10
STEP 11
10. Attach the assembled roof to the rest of the
blind frame using eight 1/4-20 X 1-1/2 IN
bolts (49) and 1/4-20 nuts (56). SEE FIGURE
10. Pay attention to the orientation of the
roof! The roof attaches on the inside of the
roof hub (3, 35, 36) tabs. SEE DETAIL B.
Securely tighten all loose hardware at this time.
11. It is now time to begin the attachment of the
sewn panels to the frame. Lay out all sewn
panels and familiarize yourself with them. Pay
special attention to the back wall panel and
the two side wall panels as they look similar
at first glance but are different. You can
identify the panels by sewn tags on the inside
near the window.
While paying attention to the orientation,
SEE DETAIL C, slide the four (28) window
poles into the sewn sleeves on the two side
wall panels (42) as shown, two poles per
panel. SEE FIGURE 11.
49
36
56
42
28
35
28
3
28
