Bristol Court
Executive Desk
Assembly Instructions
Made in China
Page 1of 2
Parts List
#24530
Executive Desk
WARNING
ASSEMBLY STEPS :
1. Place the Desk upside down on a clean, soft
surface such as a blanket or carpet.
2.
Using your Phillips Screwdriver, remove the
wood brace from underneath the desk and
discard.
3. Attach the Bun Feet with the levelers
underneath the front corners and with no
levelers underneath the back corners of both
Pedestals.
4. If required, the levelers can be adjusted to
compensate for uneven flooring. After
moving the Desk to it's final location in the
room, using two people, have one person
gently lift the front of the desk while another
person carefully reaches underneath and
adjusts the levelers.
5. Install the Grommet (B) into the hole in the
Desk Top.
B
Grommet
1 pc
FURNITURE
Riverside
email: info@riverside-furniture.com
A
Bun Feet
8 pcs
3/8" Long Wood
Screw (installed)
E 8 pcs
Figure 8
(installed)
C
8 pcs
Keys
F 2 pcs
C
D
E
A
F
6. The File drawers can be set-up to use
either Letter size or Legal size folders
using the File Bars included.
File Bar
(installed)
4 pcs
D
G
4 pcs
H 1 pc
Pencil Tray
Divider
(installed)
The Dividers are
installed in these
two drawers.
