Bristol Court
Executive Desk
Assembly Instructions
Made in China
Page 2 of 2
FURNITURE
Riverside
email: info@riverside-furniture.com
The power cord from the electrical outlet
mounted inside the knee drawer has been
pre-routed from the knee drawer out to and
secured underneath the bottom side of the
Right-Hand pedestal, which can then be
connected to a wall outlet.
If you want to exit the cord from the left
pedestal, you may need to remove the
drawers from both pedestals in order to
change or re-route the power cord from one
side to the other. Do not apply excessive force
to the cord while pulling the cord through the
access holes.
To release
drawer slide
To remove the drawer:
A. Pull the drawer fully open so the black latch is visible in the inside channel of the guides.
B. Release the latches by simultaneously pushing one lever up and the other down.
C. At the same time, pulling the drawer forward until the slides release. If necessary, empty
drawer before removing.
To Reinstall Drawer:
A. Carefully reinstall the drawer by aligning the channels on the drawer with the ball
bearings in the channels of the cabinet members and gently pushing the drawer closed.
B. Carefully open the drawer to verify it is working properly.
