Be sure to check all packing material carefully for
small parts, which may have come loose inside the
carton during shipment.
There are levelers located underneath
all four corners which can be
adjusted if necessary to compensate
for uneven flooring.
1 set
Components and Hardware List
Made in Vietnam
Page 1 of 3
email: info@riverside-furniture.com
Falls Creek
Entertainment
Assembly Instructions
Riverside
FURNITURE
16146
Drawer Storage Unit
To remove a drawer if it ever becomes necessary:
A. Pull the drawer fully open so the black latch is visible in the inside
channel of the guides.
B. Push 'down' on the right lever and 'up' on the left lever. While
holding levers in place, pull drawer forward until slides release. If the
slides will not release, push both levers in the opposite directions.
If necessary, empty drawer before removing.
To Reinstall Drawer:
A. Carefully align the channels on the drawer with the ball bearings in
the channels of the cabinet members and gently pushing the drawer
closed.
B. Carefully open the drawer to verify it is working properly.
Refer to the following page for other important drawer information.
Note:
For product and personal safety, this cabinet has
hardware installed to prevent both drawers from being
easily opened at the same time, which minimizes the risk
of the file cabinet accidentally tipping forward. An
Anti-Tip Restraint Kit is also included, which if used,
will add another level of safety.
Never attempt to open both drawers at the same time
because damage to the cabinet or drawer interlock
mechanism can occur and cause the file cabinet to be
unsafe. The drawers must be fully closed for the anti-tip
mechanism to be in a 'neutral' position and allow either
drawer to be opened.
