Made in Viet Nam
Page 2 of 2
Step 3: Using two people, carefully set
the assembled table upright.
Detail B
Step 4: To install the Table Top Leaf (B),
reach underneath the sides of the Table
Top and twist the handle of the Locks to
unlock. Pull the two halves of the Table
Top open, place the Leaf in position,
aligning the pins with the holes on the
edges and push the halves back together.
Reach underneath the Table Top and
relock.
To prevent undue stress on the Dining Table
if it is moved, using two people, always lift
and carry your Dining Table from one
location to another.
#59550-59357-2
Myra
Dining Room
Assembly Instructions
Adjustable leveler
Step 2: With the Table Top placed upside down, position the assembled base onto the bottom of the
Table Top. Connect with the 1-3/8" Allen Head Bolts (H) and the same Washers as used in previous
steps. Tighten with the Allen Wrench.
