Page 2 of 3
email: info@riverside-furniture.com
FURNITURE
Riverside
Steps:
1. Lean the back of the Headboard against the wall where the Bed will be
assembled.
2. Install two All-Thread Bolts (R-B) into the metal threaded inserts installed in the
Headboard Legs and into the metal inserts on the Footboard.
3. Carefully position one end of one Bed Rail (R-A) onto the All-thread Bolts on
the Headboard and connect using the Flats Washers (R-E), Spring Washers
(R-D), and Hex Nut (R-C). Only partially tighten the Nuts until the Footboard
has been connected. Repeat for other Bed Rail.
4. Position and connect the Footboard (F-A) to the other end of the Bed Rails,
attaching as in the previous Steps.
5. Carefully align the Footboard to be 'square' with the Headboard. Using the
Open Wrench (R-F) tighten all Hex Nuts attaching the Side Rails to the
Headboard and Footboard. (See Detail E).
Made in Viet Nam
Vogue Bed Room
King Bed
Assembly Instructions
R-G
R-C
R-E
R-B
R-D
Headboard
Bed rail
Bed rail
R-A
R-A
Standard Panel
Footboard
46180
TALL UPH HEADBOARD
46185 6/0-6/6 FOOTBOARD
46172 5/0-6/6 BED RAILS --OR--
46182 6/0 BED RAILS
461184
TALL PANEL HEADBOARD
46185 6/0-6/6 FOOTBOARD
46172 5/0-6/6 BED RAILS --OR--
46182 6/0 BED RAILS
Detail E
