WWW.RSIWW.COM
28 of 45
B-1
B-1
F-10
F-10
F-8
B-1
F-8
F-2
F-1
NOTE: VIEWS FROM OUTSIDE.
IMPORTANT: Bolt track of F-6 front profile is
lower than bolt track of G-1 gutter profile.
Assemble Back Gable
Make certain the pieces are in the correct positions before securing.
Carefully follow the order of assembly to ensure an easy installation.
Wear proper safety gear including work shoes, gloves and goggles.
Secure to B-1 connector with
one T-bolt assembly.
6.1A
Working from inside, place F-2 profile on F-1 profile.
Make sure profiles are straight.
6.1B
From inside, add connector B-7 to each corner. Secure each with two S-2C caps.
6.2
Work from outside to add B-1 connectors in the same position as inside. Loosen T-bolts on
profiles and adjust position to fit holes in B-1 connectors. Fit B-1 connector to profiles.
6.3A
NOTE: VIEWS FROM INSIDE.
Secure each B-1
connector as shown.
6.3B
F-10
F-10
F-1
F-2
F-11
Connector
QTY
S-7
S-2C
1
4
31”
QTY
Profile
F-2
1
F-6
F-6
G-1
F-7
B-7
B-7
S-2C
4
2
Connector
QTY
S-2C
12
Connector
QTY
B-1
3
