WWW.RSIWW.COM
14 of 45
Place one T-bolt on the inside bolt track of the gutter at each end.
Hand tighten both T-bolts to hold in place.
2.5B
NOTE: VIEW FROM INSIDE.
NOTE: VIEWS FROM INSIDE.
NOTE: In some cases a ¼” x ¼” notch
in top corner of W-1 panel will provide
a better fit for G-1 gutter profile.
G-1
W-1
F-7
F-7
G-1
W-1
S-7
2
Working from inside, place G-1 and G-2 gutter profiles, fitting top edge
of W-1 panels into channels of gutters. Place one short G-1 gutter
profile at each end and the five longer G-2 gutter profiles in the center.
Seams are centered to bolt tracks in F-1 profiles.
2.5A
G-1
F-7
¼”
¼”
W-1
W-1
W-1
W-1
F-7
F-1
F-1
G-1
G-2
NOTE: At front and back, edge of G-1 gutter
profile lines up flush with edge of F-7 corner profile.
