3-14 Riverstone Networks RS 3000 Switch Router Getting Started Guide
Installing the Hardware
Hardware Installation
Figure 3-13 RS 3000’s serial (DB-9 DCE) management port
Figure 3-14 Serial port (DB-9 DCE) pin-out
Table 3-3
Wiring map for serial cable
Signal (RS 3000 serial port)
Pin
Signal (management console port)
Unused
1
Unused
TXD (transmit data)
2
RXD (receive data)
a
RXD (receive data)
3
TXD (transmit data)
Unused
4
Unused
GND (ground)
5
GND (ground)
Unused
6
Unused
CTS (clear to send)
7
CTS (clear to send)
RTS (request to send)
8
RTS (request to send)
Unused
9
Unused
a. The left hand column pin assignments are for the male DB-9 connector on the RS 3000. Pin 2 (TXD or
“transmit data”) must emerge on the management console’s end of the connection as RXD (“receive data”).
3
4
2
1
1000BASE-SX
G2M-GSXA1-02
Tx
Rx
Link
AN
Tx
Rx
Link
AN
RS 3000
Serial
Management Port
2
1
1000BASE-SX
G2M-GSXA1-02
Tx
Rx
Link
AN
Tx
Rx
Link
AN
2
1
CONSOLE
10/100 MGMT
OK
ERR
DIA
G
HBT
RST
1
5
6
9