- 9 -
7. OPERATIONS AND WARRANTY CONDITIONS
7.1. Operation conditions
For reliable function of the tool we recommend to use treated compressed air. Treated compressed air means
compressed atmospheric air bare of solid particles and water, reduced to required pressure and lubricated
with anti‐corrosive oil. Immediately before the tool there must be a regulation valve set to maximum outlet
pressure of
0,7 MPa
, air filter and lubrication in the circuit of compressed air.
Sound‐pressure level of impulse noise L
pAI
does not exceed 85 dB(A), still it is recommended to use ear
protectors during continuous and long‐term operation. Average overall vibration total effective value
a
hv,8h
= 1,5 m.s
‐2
.
The trigger enables safe control of the tool with a force max. 10 N < 50 N without releasing the grip‐handle
according to the health regulation.
7.2. Warranty conditions
For reliable and safe function of the tool it is necessary to adhere to instructions and principles stated above.
For the warranty period the customer must not perform any alterations other than those permitted by the
manufacturer, see paragraph 2.1, 3.1, 3.2. Other non‐detachable parts are secured with paint. In case of
neglecting this protection the manufacturer shall not admit possible warranty repairs. To admit warranty
repair the customer must submit confirmed warranty certificate of the tool, Certificate of quality and
completeness or proof of purchase. The warranty period is 24 months from the day of purchase confirmed in
the Warranty certificate if the purchase contract does not state otherwise.
Warranty is valid provided that the following:
General safety instruction and principles (paragraph 1)
Tool operation (paragraph 2.4)
Daily and weekly maintenance (paragraph 3.1 and 3.2)
Storage (paragraph 5)
Operations and waranty conditions (paragraph 7)
Warranty does not apply to quickly expendable parts (see paragraph 4.2.)
