FLUSH MOUNT MODELS
For the models that must be mounted flush by cutting a boat wall (BU1 - BU3 - BU8 - BU10), refer to the on board mounting scheme contained in the
box.
BU3
To fix the compass to the dashboard, the cover flange must be lifted. To facilitate the operation, two slots have been provided on the right and left sides.
Use a slotted screwdriver and insert it inside a slot. Rotate in any direction and repeat the same procedure on the opposite side. The flange will rise and
you can remove it completely. Insert the compass in the seat and fix it using the holes as per the drilling diagram provided. Reposition the cover flange
paying attention to the correct insertion, in order to avoid breaking the retaining forks. As a confirmation and indication, check that the RIVIERA logo
placed on the flange is in the direction of the stern of the boat.
USER’S MANUAL - Magnetic compass for navigation RIVIERA type URANIA 4 "
COMPENSATION & MAINTENANCE
Riviera compasses are calibrated for zone A. On request, when
ordering, they can be calibrated for zone B or C.
After installation on board, compass compensation must be carried out
by a professional authorized by the local Maritime Authority who will
operate on the screws accessible through the lower transverse holes.
Clean the Riviera compass with a soft cloth moistened with fresh
water.
REPAIR
For the purposes of forfeiture of the warranty terms and for your safety,
any repairs may be carried out only and exclusively by the
manufacturer. In case of need, please contact RIVIERA Srl -
info@rivieragenova.com
Certificate of Warranty
This document is valid as a guarantee certificate.
The company RIVIERA srl Genoa guarantees that its compasses are built in a workmanlike manner and that they are free from manufacturing and
material defects.
If within 36 months from the date of manufacture (stamped on the flange) the product should show malfunctions, the company will repair or replace it, at
its sole discretion, free of charge.
The warranty is void if the damage is caused by improper use, incorrect installation or accidental breakage.
The warranty does not cover any costs deriving from assembly or disassembly of the products, transport of the same and expenses for technical
personnel, even if attributable to manufacturing defects.
In the event of a dispute, the competent court is the court of Genoa.
PACKAGING
The RIVIERA URANIA compass is delivered in protective packaging
suitable for international shipping
1 box dim.19x19x20 cm total weight Kgs.1,700
Riviera Srl Genova -
Via Inferiore Rio Maggiore, 4A - 16138 Genova (Italy) – Tel. +39 010 8355286 – info@rivieragenova.it
2/2
LIQUID
The liquid contained in the RIVIERA compasses is stable in the
temperature range from -30 ° to + 60 ° C. In this range there should be
no bubbles, this is guaranteed by an elastic membrane that
compensates for volumetric variations. The liquid is Shell SolD / 70
(petroleum).
ATTENTION:
Never unscrew the filler plugs and screws for any
reason. The only screws to adjust are those of the compensators
(with a non-magnetic screwdriver). When the cut of the
compensator screws is in the horizontal position the
compensation is neutral, bringing the cut in the vertical position
is maximum.
