15
Assembly notes for the diverter in the jet insert
- Loosen the Z-bracket and withdraw the jet insert from the jet bushing.
- Place the locking ring on the diverter and push them, together, into the jet
bushing, ensuring that the cranked diverter opening is centralised to the
middle outlet opening of the jet bushing.
- attach the jet closers (made from transparent PVC pipe) and screw on the
locking ring, hand tighten. While doing this, ensure the diverter opening
does not move in the process.
- insert the jet insert and screw on the Z-bracket. try moving the jet to check
that the diverter moves easily and without sticking and that it locks into
and out of the other switch position.
6.
Assembly note
for the diverter of
the jet insert
Jet insert
Z bracket
diverter
Locking ring
