background image

3

General

1. General

Complete counter-current and massage unit consisting of:

a double stream counter-current system with air regulator, adjustable-

power  jets  and  handle. the  jets  can  be  manually  switched  to  2 

turbojets and a master jet in the seating area and a water torrent in the pool 

wall. modena 520 and 660 are fitted with 10 microjets back and calf massage. 

Here the turbojet back jets are omitted. Pump rating 2 x 1.5 kW - 230 V, switched 

from the control panel in the pool wall.

the Fun Pak is a multifunctional fixed location counter-current and massage 

system for the private sector. the Fun Pak, as a standard feature, is delivered 

completely pre-assembled in the pool. For this the rivieraPool foundation shaft 

is required for the corresponding steps.

if, due to lack of space or building reasons, a rivieraPool foundation shaft

can not be used, the pumps can be installed when all the equip-

ment  is  onsite.  in  this  case  it  is  important  that  the  Fun  Pak

equipment must not, for any reason, be concreted in.

the pumps are deliv-

ered separately. 

the power region of the counter-current equipment is arranged for and average 

breaststroke swimmer. 

the water temperature for athletic activities in the swimming should not 

exceed 28° C.

1   double stream CCs
2   turbojet massage jets
3   masterjet massage jet
4

  

Water torrent

5

   

Floor geyser (optional)

1.1 

Description

 

of the equipment

1.2 

Intended Use

2

4

5

3

1

Summary of Contents for Fun Pak F4

















Reviews: