Key Description
III.
Operating Instructions
A.
Preparation
A-1 Please check all accessories of the instrument before using (each
item: 1pc)
：
◇
Main instrument -----------------------------------NO.TK-62
◇
Soft portable leather case ----------------------NO.765C
◇
9V battery (option)--------------------------------NO.B09V
◇
RS-232 cable---------------------------------------NO.6201C
◇
Instruction manual
A-2 Set battery:
◇
Press the round mark on the instrument battery cap and push the cap
below and set the batteries by
⊕
polarity and push back the battery
cap.
※
Notice: Please be sure to buckle the battery and please notice
the wire can’t be squeezed.
A-3 Insert the temperature probe into
⊕
, and make sure the probe
is fully inserted and firm.
A-4 Power on and power model
：
◇
Auto power off mode→ Press
key to turn on TK-62, if there is no
any operation within 5 minutes, it will turn off automatically.
※
At
about 5 seconds before auto power off, this instrument will make a
"Be" sound alert.
◇
Manual power off mode→When power off, hold
and press
to turn on TK-62 and the instrument will process manual power off
mode, except for pressing
or battery exhausted, the instrument
will not turn off automatically.
※
Whatever auto/manual power off mode, just press
for
power off.
B. Measurement method
B-1 Finish the power on steps as above, please check the battery power
indicator to sure the power is enough and it is available to process
temperature measurement and every function operating.
B-2 Please select corresponding thermocouple type to get accrete
temperature on the display.
C. Record function operating
– use
as the operation below:
C-1 Reading value hold function
（
HOLD
）
When get reading value at B-2 step, press one time to hold the
value on the display.
C-2 Maximum reading value function
（
MAX
）
Press the key twice in the normal mode to read the maximum value.
C-3 Minimum reading value function
（
MIN
）
Press the key thrice in the normal mode to read the minimum value.
※
Press above key again, and it will return to the normal mode.
D. LCD Back-light function
On
：
In the normal mode, press to turn on back-light.
Off
：
When back-light is on, press to turn off back-light.
※
If there is no any operation within 120 seconds,
back-light will be turned off automatically.
※
Back-light function will deplete power speedily, if it is not
necessary, please don’t use back-light as possible.
E. Calibration and adjustment function
This instrument has been adjusted completely before ex-factory. If the
condition is special and needs to adjust the instrument, please use
Standard Thermocouple Calibrator to adjust TK-62 by using small
type
screwdriver to fine tune this instrument to get the correct calibration value.
◆
Before calibrating, please check if the power is enough and then process
the calibration.
◆
If you don’t know if the instrument needs to be adjusted, please contact
our technical de
partment firstly and don’t change any original setting.
F. Power inspection function
The display left above has a power indicator symbol, if the power is not
enough, the symbol will flash and make a voice “Be” warning about 5
seconds. Please replace the new batteries immediately and then operate the
instrument again.
Key
Function
Description
LCD display
Power key
Press once for power on or off
(If the instrument without any button
operation, it will automatically turn off
after 5 minutes.)
When power off, hold then press
to turn on and process manual operating
mode.
8 8 8 8
(about 2 seconds )
A. (HOLD) Hold
value, Max./Min.
value.
First press Hold Value
Second
Max. Value
Third
Min. Value
Forth
Measuring mode
Measuring→
HOLD
HOLD→ MAX
MAX → MIN
→Measuring mode
B. Manual power
off
+ as above
M
Select K/R type
thermocouple
Press this key to switch thermocouple type
（
K
or
R
-TYPE
）
K → R→ K
LCD back-light key
Press this key to turn on/off the back-light of LCD.
※
LCD Back-light will be auto power off after 2
min. for saving power.
℃
/
℉
Switchable
Press this key to switch
℃
/
℉
℃
→
℉
,
℉
→
℃
Key
Function
Description
LCD display
Power key
Press once for power on or off
(If the instrument without any button
operation, it will automatically turn off
after 5 minutes.)
When power off, hold then press
to turn on and process manual operating
mode.
8 8 8 8
(about 2 seconds )
A. (HOLD) Hold
value, Max./Min.
value.
First press Hold Value
Second
Max. Value
Third
Min. Value
Forth
Measuring mode
Measuring→
HOLD
HOLD→ MAX
MAX → MIN
→Measuring mode
B. Manual power
off
+ as above
M
Select K/R type
thermocouple
Press this key to switch thermocouple type
（
K
or
R
-TYPE
）
K → R→ K
LCD back-light key
Press this key to turn on/off the back-light of LCD.
※
LCD Back-light will be auto power off after 2
min. for saving power.
℃
/
℉
Switchable
Press this key to switch
℃
/
℉
℃
→
℉
,
℉
→
℃
