STEP 17
TRIM OUT YOUR BODY, SET OVER THE CHASSIS AND MARK THE OUTSIDE FOR POST HOLES AND
WHEEL CUTOUTS, PAINT THE BODY , CUT OUT AND DRILL MOUNT HOLES, MOUNT THE BODY, THEN PEEL
THE PROTECTIVE FILM. WE HAVE PROVIDED A LEXAN SHEET AND TEMPLETS SO YOU CAN ADD SIDEDAMS
AND A REAR DECK EXTENSION LIKE THE ONES ON THE BOX LABEL .LAY THE LEXAN SHEET OVER THE TEM-
PLET AND SCORE ALONG THE LINES WITH YOUR HOBBY KNIFE. PEEL THE PROTECTIVE FILM ON THE OPPO-
SITE SIDE OF THE SHEET AND PAINT THE LEXAN AS YOU WISH .BEND THE LEXAN AWAY FROM THE CUT
SIDE UNTIL IT SNAPS. ATTACH THE PARTS TO YOUR BODY WITH SCREWS OR DOUBLE SIDED TAPE .
CHARGE YOUR BATTERY, CHECK OUT YOUR RADIO SETTINGS AND ADJUSTMENTS AND THEN
GO OUT
AND HAVE SOME FUN!
YOU CAN INCREASE THE REAR TRACTION BY WIPING YOUR REAR TIRES WITH
WD-40. IT WILL CLEAN AND SOFTEN THE RUBBER . REPLACEMENT PARTS AND ACCESSORIES ARE AVAIL-
ABLE THRU YOUR LOCAL HOBBY SHOP.
SEE www.rjspeed .com FOR A LISTING OF NEW PRODUCTS AND ACCESSORIES
WIRING FOR MICRO SWITCH SPEED CONTROL
MOTOR
BATTERY
MICRO SWITCH
ON / BRAKE
NO
NC
C
4
