AVAILABLE ACCESSORIES
5246 3-PC FRONT AXLE PLATE
5247 REPLACEMENT OUTER ARMS (2)
5066 OFFSET FRONT ARMS FOR 5246
THESE ARE MADE TO REPLACE THE 5244 FRONT AXLE PLATE. THEY
ARE MADE IN THREE PIECES SO THAT YOU CAN REPLACE ONE SIDE IF
BROKEN WITHOUT HAVING TO SPLIT THE CHASSIS SIDES TO GET IT
OUT. ALSO , YOU CAN TUNE YOUR CAR BY MOUNTING THE OUTER
ARMS ON TOP OR BOTTOM OF THE CENTER PLATE, OR EVEN ONE
SIDE ON TOP AND THE OTHER ON THE BOTTOM.
INSTALL THE CENTER BY SPLITTING THE CHASSIS AND REPLACING
THE 5244 PLATE WITH THE CENTER PLATE FROM THE 5246 KIT . YOU
CAN THEN ADD THE OUTER PLATES AS YOU WISH. USE 5-40 X 3/8
SCREW (7030) AND 7207 LOCK NUT IN THE REAR HOLE AND THE SUP-
PLIED 4-40 X 1/4 SCREW THRU THE CENTER PLATE AND THREAD IT
INTO THE OUTER ARM.
USE OUR 5318 (NARROW) ALUMI-
NUM HUB TO UPGRADE YOUR
DIFF. IT WILL MATE UP TO THE
5740 ALUM. DIFF ADAPTOR.
OUR 5313 (NARROW HYBRID) AND 5314
(STANDARD ALUMINUM) HUBS ARE AVAILABLE
TO UPGRADE THE SET SCREW SIDE.
OUR 5248 HEAT SINK CAN BE
ADDED BETWEEN YOUR MOTOR
AND THE CHASSIS PLATE TO
HELP IT RUN COOLER.
OUR 5250 LINKAGE KIT PROVIDES MORE PRE-
CISE STEERING AND CAN BE ADJUSTED BY
SNAPPING OFF THE BALL CUPS AND THREAD-
ING THEM IN OR OUT ON THE LINK ROD. THE
WIRE LINK CAN BE RE-BENT TO SUIT MOST
MOUNTINGS.
03-16 RJS
WATCH FOR MORE ACCESSO-
RIES FROM RJ SPEED AT YOUR
LOCAL HOBBY STORE.
www.rjspeed.com
2057 70’S CLASSIC SS SEDAN BODY 1/10
WATCH FOR MORE NEW
OVAL AND ROAD RACE
BODIES FOR THE SPEC 10
CHASSIS
