2.PROCEDURE FOR SETTING
IMCB10-E1
17
(3) PGdP (Setting the position of decimal point)
z
The set position of the decimal point is displayed only for current or voltage input.
z
Any digits other than the units digit are not used. As malfunction may result, do not
change any of these digits.
Factory set value : "0001"
Set value
Description
0
No digit below decimal point
Setting the position of decimal point
1
1 digit below decimal point
2
2 digit below decimal point
3
3 digit below decimal point
0
0
0
Fixed
(4) AH1 (Differential gap setting of alarm 1 [ALM1] )
Not displayed when there is no alarm 1 (ALM1).
("SL4" setting : "0000")
[Setting range]
c
TC and RTD inputs
: 0 to 100 or 0.0 to 100.0
d
Voltage and current inputs : 0.0 to 10.0 of span
[Factory set value]
c
TC and RTD inputs
: 2 or 2.0
d
Voltage and current inputs : 0.2
(5) AH2 (Differential gap setting of alarm 2 [ALM2] )
Not displayed when there is no alarm 2 (ALM2).
("SL5" setting : "0000")
[Setting range]
c
TC and RTD inputs
: 0 to 100 or 0.0 to 100.0
d
Voltage and current inputs : 0.0 to 10.0 of span
[Factory set value]
c
TC and RTD inputs
: 2 or 2.0
d
Voltage and current inputs : 0.2
CAUTIONS
CAUTION
CAUTION