9. OPERATION
IMR01N12-E7
103
Continued from the previous page.
Continued on the next page.
AREA SV
PV2
OUT1
Input 2_measured value (PV2)/set value (SV2) monitor
Measured value 2 (PV2)
SET key
Set value 2 (SV2)
In the Manual operation, the Manipulated output value (MV2) of Input 2 can be set.
Setting range: Input 2_output limiter low to Input 2_output limiter high
When the Setting change rate limiter is set and the SV is changed, the SV changes
at specific rates in the display.
AREA
OUT1
AREA
OUT1
Input 1_set value (SV1)
setting screen
Input 2_set value (SV2)
setting screen
SET key
SET key
AREA
PV2
PV1
OUT1
Input 1_measured value (PV1)/Input 2_measured value (PV2) monitor
Measured value 1 (PV1)
Measured value 2 (PV2)
A
SET key
OUT1
Displays the remote set value which is the control target value in the Remote (REM) mode.
Displayed only when the Remote input function is provided.
Display range:
Input 1_setting limiter low to Input 1_setting limiter high
Remote input value monitor
SET key
The maximum PV value (peak value) of Input 1 is held and displayed. Displayed only when
the hold function provided.
Display range:
Input 1_input scale low to Input 1_input scale high
Peak hold function:
Refer to the next page.
PV1 peak hold value monitor
B
SET key
: Parameters related to multi-memory area function
: Parameters displayed when function is specified.