9. ENGINEERING MODE
IMR01N12-E7
56
Continued from the previous page.
Function block
Parameter
Page
Event 4
Event 4 type selection
(ES4)
P. 80
(F44.)
Event 4 hold action
(EHo4)
P. 82
Event 4 differential gap
(EH4)
P. 83
Event 4 action at input error
(EEo4)
P. 84
Event 4 assignment
(EVA4)
These are function blocks unused in the HA430/930.
(F45.)
(Their settings are invalid)
These are function blocks unused in the HA430/930.
(F46.)
(Their settings are invalid)
Control
Hot/Cold start selection
(Pd)
P. 85
(F50.)
Input 2_use selection
(CAM)
These items are not used for the HA430/930.
(CAr)
(CAb)
SV tracking
(TrK)
P. 86
Control 1
Input 1_control action type selection
(1.
oS)
P. 87
(F51.)
Input 1_integral/derivative decimal point position
(1.IddP)
Input 1_derivative gain
(1.
dGA)
Input 1_ON/OFF action differential gap (upper)
(1.
oHH)
P. 88
Input 1_ON/OFF action differential gap (lower)
(1.
oHL)
Input 1_action at input error (high)
(1.AoVE)
P. 89
Input 1_action at input error (low)
(1.AUnE)
Input 1_manipulated output value at input error
(1.
PSM)
P. 90
Input 1_manipulated output value when transferred
to Auto from Manual
(1.PSM’)
Input 1_output change rate limiter (up)
(1.
orU)
Input 1_output change rate limiter (down)
(1.
ord)
P. 91
Input 1_output limiter high
(1.
oLH)
P. 92
Input 1_output limiter low
(1.
oLL)
These items are not used for the HA430/930.
(1.
PFF)
(1.PFFS)
Input 1_MV transfer function
(1.MVTS)
P. 92
Control 2
Input 2_control action type selection
(2.
oS)
P. 87
(F52.)
Input 2_integral/derivative decimal point position
(2.IddP)
Input 2_derivative gain
(2.
dGA)
Input 2_ON/OFF action differential gap (upper)
(2.
oHH)
P. 88
Input 2_ON/OFF action differential gap (lower)
(2.
oHL)
Input 2_action at input error (high)
(2.AoVE)
P. 89
Continued on the next page.
