10 • Overview
EAGLE 2 Operator’s Manual
Chapter 1: Introduction
Overview
This chapter briefly describes the EAGLE 2 gas monitor. This chapter also describes the
EAGLE 2 Operator’s Manual
(this document). Table 1 at the end of this chapter lists the
specifications for the EAGLE 2.
About the EAGLE 2
Using an advanced detection system consisting of up to six gas sensors, the EAGLE 2
sample draw gas monitor is capable of detecting the presence of combustible gas, oxygen
(O
2
), carbon monoxide (CO), hydrogen sulfide (H
2
S), and various other toxic gases
simultaneously. The EAGLE 2’s rugged, reliable, and easy-to-use design makes it ideally
suited for a wide range of applications, including sewage treatment plants, utility
manholes, tunnels, hazardous waste sites, power stations, petrochemical refineries, mines,
paper mills, drilling rigs, and fire fighting stations. The EAGLE 2 offers a full range of
features including:
•
Simultaneous monitoring of one to six gases. The standard configuration includes four
sensors for combustible gas (%LEL, ppm, and %volume), oxygen, carbon monoxide
(CO), and hydrogen sulfide (H
2
S).
•
Choice of three operating modes:
•
Normal Mode for typical confined space or area monitoring. Normal Mode is the
standard factory setting.
•
Bar Hole Mode for checking of bar holes when searching for underground gas
leaks
•
Leak Check Mode for locating leaks in valves and piping
•
Sample-drawing pump with up to 125 foot range
•
Liquid crystal display (LCD) for complete and understandable information at a glance
•
Ultrabright alarm LEDs
•
Distinctive audible alarm for dangerous gas conditions or unit malfunction
•
Microprocessor control for reliability, ease of use, and advanced capabilities
•
Data logging functions (when used in Normal Mode)
•
Alarm trend data (when used in Normal Mode)
•
STEL and TWA (when used in Normal Mode) and over range alarms
•
Peak readings (when used in Normal Mode)
•
Built-in time function
•
Lunch break feature
•
RF shielded high impact plastic case
•
CSA classified for Class I, Division I, Groups A, B, C, and D hazardous atmospheres
www.
.com
information@itm.com
1.800.561.8187