112 • Using Setup Mode
EAGLE 2 Operator’s Manual
Updating the Data Log Memory Setting
With
DATA LOG MEMORY
set to
ON
(factory setting), the Data Logging Screen in
Display Mode asks whether you want to clear the logged data in addition to showing the
log time remaining (see “Data Logging Screen” on page 51).
With
DATA LOG MEMORY
set to
OFF
, the Data Logging Screen only shows the
remaining log time and does not give you the opportunity to clear the logged data.
1. From the main menu, place the cursor next to
DATA LOG MEMORY
.
2. Press and release POWER ENTER RESET. The Prompt to Clear Data Log Memory?
Screen appears.
3. Use AIR
▲
YES or RANGE
▼
SHIFT to display the desired setting.
4. Press and release POWER ENTER RESET to save the setting and return to the main
menu.
Updating the LCD Contrast Setting
The contrast setting controls the LCD contrast. Select the setting so the characters on the
display are easy to see. It can be set from 1 to 15. The factory setting is 8. The higher the
setting, the darker the characters and LCD background.
1. From the main menu, place the cursor next to
ADJUST
CONTRAST
.
2. Press and release POWER ENTER RESET. The Adjust Contrast Screen appears.
3. Use AIR
▲
YES or RANGE
▼
SHIFT to adjust the setting so that the characters on
the LCD are easy to see.
4. Press and release POWER ENTER RESET to save the setting and return to the main
menu.
PROMPT TO CLEAR
DATA LOG MEMORY?
UP/DOWN THEN ENTER
ON
ADJUST CONTRAST
UP/DOWN THEN ENTER
8
www.
.com
information@itm.com
1.800.561.8187
