116 • Using Setup Mode
EAGLE 2 Operator’s Manual
With
CONFIRMATION ALERT
set to
OFF
(factory setting), the EAGLE 2 does not
sound a confirmation alert.
1. From the main menu, place the cursor next to
CONFIRMATION ALERT.
2. Press and release POWER ENTER RESET. The Confirmation Alert Screen appears.
3. Use AIR
▲
YES or RANGE
▼
SHIFT to display the desired setting.
4. Press and release POWER ENTER RESET to save the setting and return to the main
menu.
Turning the Password Function On or Off
With
CHANGE PASSWORD
set to
ON
, the EAGLE 2 prompts you for a password
when you enter Calibration Mode or Setup Mode.
NOTE:
If a calibration is due and
CAL REMINDER
is set to
ON
and
CAL PAST
DUE ACT
is set to
MUST CALIBRATE
, no password will be required to
perform a calibration during startup.
With
CHANGE PASSWORD
set to
OFF
(factory setting), no password is required to
enter Calibration Mode or Setup Mode.
1. From the main menu, place the cursor in front of
CHANGE PASSWORD
.
2. Press and release POWER ENTER RESET. The Password Protection Screen appears.
3. Use AIR
▲
YES or RANGE
▼
SHIFT to display the desired setting.
4. If you selected
OFF,
press and release POWER ENTER RESET to save the setting
and return to the main menu.
If you selected
ON
CONFIRMATION ALERT
UP/DOWN THEN ENTER
OFF
PASSWORD
PROTECTION
UP/DOWN THEN ENTER
OFF
www.
.com
information@itm.com
1.800.561.8187
