EAGLE 2 Operator’s Manual
Using Setup Mode • 117
5. Press and release POWER ENTER RESET. The Set Password Screen appears. The
factory set pass password of 0000 is at the bottom of the screen with the first 0
flashing.
6. Use AIR
▲
YES or RANGE
▼
SHIFT to display a number from 0 to 9.
7. Press and release POWER ENTER RESET to enter the selection and advance to the
next number.
8. Repeat Step 6 and Step 7 to select the remaining numbers. When you press and
release POWER ENTER RESET to enter the last number, the password is saved and
you return to the main menu.
Restoring the Default Settings
Each of the EAGLE 2 setup parameters, such as the auto calibration values, zero and span
settings, or parameters in Setup Mode, has a default setting. For the items in Setup Mode,
the default settings are the same as the standard factory settings. If you want to return the
EAGLE 2 to its default configuration, it is possible to do so by using the Default Settings
menu item in Setup Mode. Returning the EAGLE 2 to its default configuration can be
useful if various setup parameters have been changed in the field and you want to return
the EAGLE 2 to its original configuration as shipped from the factory.
The standard default gas configuration is LEL/oxygen/H
2
S/CO. If you have turned any
channels off or have added channels to your EAGLE 2, you will have to re-setup your
EAGLE 2 to the desired gas combination if you restore the EAGLE 2 to its default
configuration.
There are some special EAGLE 2 configurations that may have a different default
configuration than the standard. Consult RKI Instruments, Inc. for information regarding
non-standard default configurations.
WARNING:
When the EAGLE 2 is restored to its default configuration, the zero and
span values for each channel are reset. You must recalibrate all active
channels if you restore the EAGLE 2 to its default configuration.
1. From the main menu, place the cursor in front of
DEFAULT SETTINGS
.
2. Press and release POWER ENTER RESET. The Restore Default Configuration?
Screen appears asking if you want to restore the default configuration.
SET PASSWORD
0000
RESTORE DEFAULT
CONFIGURATION?
www.
.com
information@itm.com
1.800.561.8187