EAGLE 2 Operator’s Manual
Parts List • 183
23. Make sure that the top case gasket is fully seated in its groove and carefully put the
top case back on the bottom case. If you have any difficulty mating the top and
bottom cases, inspect the placement of the main PCB and the placement of the top
case gasket.
24. Turn the EAGLE 2 upside down and tighten the three case screws to secure the top
case to the bottom case.
25. Calibrate the ESM-01 channel as described in “ESM-01 Calibration” on page 166.
Parts List
Table 20: ESM-01 EAGLE 2 Parts List
Part Number
Description
33-7120RK
H
2
S scrubber disk, for ESM-01DH-D-HCN sensor
33-7121RK
H
2
S scrubber disk, for ESM-01DH-F-SO2 sensor
47-5015RK
ESM-01 sensor cable
ESM-01DH-ASH3
Arsine sensor, 0-1.50 ppm
ESM-01R-NH3
Ammonia sensor, 0-75.0 ppm
ESM-01DH-D-HCN
Hydrogen cyanide sensor, 0-15.0 ppm
ESM-01DH-PH3
Phosphine sensor, 0-1.00 ppm
ESM-01DH-F-SO2
Sulfur dioxide sensor, 0-6.00 ppm
ESM-K01-CL2
Chlorine sensor, 0-3.00 ppm
81-0142RK-02
Calibration cylinder, 5-gas (SO
2
, CH
4
, O
2
, H
2
S, CO), 58-liter aluminum
81-0142RK-04
Calibration cylinder, 5-gas (SO
2
, CH
4
, O
2
, H
2
S, CO), 34-liter aluminum
81-0170RK-02
Calibration cylinder, 5 ppm SO
2
in nitrogen, 58 liter
81-0170RK-04
Calibration cylinder, 5 ppm SO
2
in nitrogen, 34 liter
81-0175RK-02
Calibration cylinder, 10 ppm NH
3
in nitrogen, 58 liter
81-0175RK-04
Calibration cylinder, 10 ppm NH
3
in nitrogen, 34 liter
81-0185RK-02
Calibration cylinder, 0.5 ppm PH
3
in nitrogen, 58 liter
81-0192RK-02
Calibration cylinder, 2 ppm Cl
2
in nitrogen, 58 liter
81-0192RK-04
Calibration cylinder, 2 ppm Cl
2
in nitrogen, 34 liter
81-0196RK-02
Calibration cylinder, 10 ppm HCN in nitrogen, 58 liter
81-0196RK-04
Calibration cylinder, 10 ppm HCN in nitrogen, 34 liter
www.
.com
information@itm.com
1.800.561.8187
