EAGLE 2 Operator’s Manual
Optional Accessories • 23
Optional Accessories
Several optional accessories are available for the EAGLE 2. They include rechargeable
Ni-MH batteries, battery chargers, various special probes, and dilution fittings. The most
commonly used optional accessories are described below. Detailed instructions regarding
the use of these and other available accessories are included in other parts of this manual.
Data logging accessories are briefly described in “Data Logging” on page 52.
Rechargeable Ni-MH Batteries
Rechargeable Ni-MH batteries are available for the EAGLE 2. A fully charged set of Ni-
MH batteries will power the EAGLE 2 for 18 hours. The batteries will last for a minimum
of 500 charge cycles. See “General Parts List” on page 79 for ordering information.
Battery Chargers
Three battery chargers are available for the EAGLE 2 to charge the optional Ni-MH
batteries, the standard AC charger, a DC charger with a vehicle plug adapter, and an AC/
DC charger with a vehicle plug adapter.
AC Charger
The standard AC charger consists of the charging module, which includes all of the
charging circuitry, and an AC adapter. The charging module includes a five foot cable with
a connector on the end that mates with the EAGLE 2 charging socket. The AC adapter
plugs into a 115 VAC wall outlet and connects to the charging module with a jack on the
end of a five foot DC output cable. The AC adapter will also work for 100 VAC or 220
VAC if an appropriate plug adapter is provided. The AC charging station is shown below
Figure 7: EAGLE 2 AC Charger
AC Adapter
Charging Module
www.
.com
information@itm.com
1.800.561.8187