EAGLE 2 Operator’s Manual
Leak Testing • 255
Turning the Buzzer On and Off in Leak Check Mode
The alarm buzzer can be turned off and on when the EAGLE 2 is in Leak Check Mode.
This setting only applies to Leak Check Mode and does not affect buzzer operation in
Normal or Bar Hole Mode. The buzzer setting is displayed in the lower left corner as
BUZZER ON
when the buzzer is on or
BUZZER OFF
when the buzzer is off. When the
EAGLE 2 is turned off or you exit Leak Check Mode, it remembers the buzzer setting. So
when the EAGLE 2 is turned on again or you return to Leak Check Mode after operating
in Normal Mode or Bar Hole Mode, the buzzer has the same setting it did the last time it
was in Leak Check Mode.
To turn the buzzer off or on while in Leak Check Mode, press and release the DISPLAY
ADJUST NO button.
Turning Off the EAGLE 2, Leak Check Mode
1. Press and hold the POWER button.
2. The buzzer will sound and the LCD back light will flash for about five seconds.
3. Release the button when GOODBYE appears on the display. When GOODBYE
disappears and the backlight turns off, the unit is off.
www.
.com
information@itm.com
1.800.561.8187