EAGLE 2 Operator’s Manual
Display Mode • 47
View Alarm Settings Screen
The View Alarm Settings Screen gives you the option to view the gas alarm settings for all
active channels.
To view the gas alarm settings, do the following:
1. With the View Alarm Settings Screen displayed, press and release the AIR
▲
YES
button. The following screen appears showing Channel 1 alarm points.
2. If the channel description is too long to fit across the screen, press and release the
POWER ENTER RESET button to view the remainder of the displayed channel’s
description. Press and release the POWER ENTER RESET button again to return to
the previous screen.
3. If the number of alarm settings is too many to display on one screen, a down arrow
will appear in the lower right corner of the display indicating that there are additional
alarm points. Press and release the RANGE
▼
SHIFT button to scroll down and
display the remainder of the gas alarm settings for the displayed channel and again to
return to the previous screen.
VIEW ALARM
SETTINGS?
CHANNEL 1
CH4 0- 100 %LEL
LO ALRM: 10 %LEL
HI ALRM: 10 %LEL
LO ALRM: 5000 ppm
HI ALRM:25000 ppm
CHANNEL 1
METHANE
LO ALRM: 10 %LEL
HI ALRM: 10 %LE L
LO ALRM: 5000 ppm
HI ALRM:25000 ppm
CHANNEL 1
CH4 0- 100 %LEL
LO ALRM: 10 %LEL
HI ALRM: 10 %LEL
LO ALRM: 5000 ppm
HI ALRM:25000 ppm
POWER
ENTER
RESET
CHANNEL 1
CH4 0- 100 %LEL
LO ALRM: OFF vol%
HI ALRM: OFF vol%
CHANNEL 1
CH4 0- 100 %LEL
LO ALRM: 10 %LEL
HI ALRM: 10 %LEL
LO ALRM: 5000 ppm
HI ALRM:25000 ppm
RANGE
SHIFT
www.
.com
information@itm.com
1.800.561.8187