50 • Display Mode
EAGLE 2 Operator’s Manual
The station ID list cannot be edited using the EAGLE 2 user interface. The Eagle 2
Maintenance Data Loader Program is required to define or change station IDs in the
station ID list. For a detailed description of editing the list of station IDs stored in the
EAGLE 2, see the Eagle 2 Maintenance Data Loader Program Operator’s Manual.
To select a different station ID:
1. With the Select Station ID Screen displayed, press and release the AIR
▲
YES
button. A screen appears that includes the current station ID which is indicated by the
cursor next to it.
The station IDs are displayed in groups of six. The previous group of six is displayed
when the cursor is moved up past the top of the LCD. The next group of six is
displayed when the cursor is moved down past the bottom of the LCD. The list will
not “wrap around” to the previous screen if the cursor is moved up from the first
station ID or to the next screen if the cursor is moved down from the last station ID.
Any of the station IDs in the list that have not been changed from the factory setting
will be shown as dashes (-).
2. Use the AIR
▲
YES and RANGE
▼
SHIFT buttons to move the cursor up and down
the screen and scroll through the available station IDs to find the desired station ID.
3. When the desired station ID is displayed, place the cursor next to it, press and release
the POWER ENTER button.
NOTE:
To exit the selection screen without saving a change, press and release the
DISPLAY ADJUST NO button. You will return to the Select Station ID screen
without saving the station ID change.
4. The unit will save the selected station ID as the current one and proceed to the Time
in Operation Screen.
Time in Operation Screen
The Time In Operation Screen displays the length of time since the EAGLE 2 was turned
on if the lunch break feature is turned off. With the lunch break feature turned off, the time
in operation is reset when the EAGLE 2 is turned off. See “Updating the Lunch Break
Setting” on page 118 for a description of the lunch break feature.
If the lunch break feature is turned on, the time in operation will only be reset if you do not
choose to resume the peak and TWA measurements when the EAGLE 2 is turned on in the
Resume Measurement Screen described in Step 7 on page 28 in “Turning On the EAGLE
Pump 2
> Pump 3
Valve 5
----------------
----------------
----------------
TIME IN
OPERATION
45
MINUTES
www.
.com
information@itm.com
1.800.561.8187