98 • Using Setup Mode
EAGLE 2 Operator’s Manual
3. Use AIR
▲
YES or RANGE
▼
SHIFT to display the desired year.
4. Press and release POWER ENTER RESET to save the setting. The month setting
flashes.
5. Repeat Step 3 and Step 4 to enter the month, day, hours, minutes, and seconds
settings. The main menu displays after you enter the seconds setting.
Setting the Date Format
The date can be displayed in two ways, month/day/year (factory setting) or day/month/
year.
1. From the main menu, place the cursor next to
SET DATE FORMAT
.
2. Press and release POWER ENTER RESET. The Set Date Format screen appears with
the current setting flashing.
3. Use AIR
▲
YES or RANGE
▼
SHIFT to display the desired setting.
4. Press and release POWER ENTER RESET to save the setting and return to the main
menu.
Setting the Battery Type
This menu item allows you to select between alkaline and Ni-MH batteries. Since the
discharge characteristics of alkaline and Ni-MH batteries are different, the EAGLE 2 uses
this setting to ensure that the low battery
warning
is in effect long enough before a dead
battery
alarm
to allow the user to change the batteries without a dead battery alarm
occurring. This setting has no effect on battery charging.
1. From the main menu, place the cursor next to
SET BATTERY TYPE
.
2. Press and release POWER ENTER RESET. The Battery Type screen appears with the
current setting flashing.
3. Use AIR
▲
YES or RANGE
▼
SHIFT to display the desired setting.
4. Press and release POWER ENTER RESET to save the setting and return to the main
menu.
SET DATE FORMAT
UP/DOWN THEN ENTER
MM/DD/YYYY
BATTERY TYPE
UP/DOWN THEN ENTER
ALKALINE
www.
.com
information@itm.com
1.800.561.8187
