GX-3R Pro Operator’s Manual
Chapter 5: User Mode and Calibration
•
94
6. See “ESCAPE” on page 98 to return to User Mode.
CAL TIME
The
CAL TIME
is the total time the instrument is exposed to calibration gas when a bump test
fails if
AUTO CAL
is set to
ON
. The bump test time is deducted from the calibration time. For
example, if the
CAL TIME
is set to 90 seconds and the
GAS TIME
is set to 30 seconds, if the
bump test fails, the GX-3R Pro will only be exposed to gas for an additional 60 seconds. The
available values are
90
seconds (factory setting), and
120
seconds.
1. While in the
BUMP SETTING\BUMP PARAMETER
menu, use AIR to place the cursor
next to
CAL TIME
.
2. Press and release POWER MODE. The current setting flashes.
3. Use AIR to display the desired setting.
4. Press and release POWER MODE to save the setting and return to the
BUMP PARAMETER
menu.
5. See “ESCAPE” on page 96 to return to the
BUMP SETTING
menu.
6. See “ESCAPE” on page 98 to return to User Mode.
AUTO CAL
ON
(factory setting): If a bump test fails, the unit automatically begins a calibration.
OFF
: If a bump test fails, the unit does not automatically begin a calibration.
1. While in the
BUMP SETTING\BUMP PARAMETER
menu, use AIR to place the cursor
next to
AUTO CAL
.
2. Press and release POWER MODE. The current setting flashes.
3. Use AIR to display the desired setting.
4. Press and release POWER MODE to save the setting and return to the
BUMP PARAMETER
menu.
5. See “ESCAPE” on page 96 to return to the
BUMP SETTING
menu.
6. See “ESCAPE” on page 98 to return to User Mode.
MAINTE
7:49
TOLERANCE
CAL TIME
AUTO CAL
BUMP PARAMETER
MAINTE
7:49
CAL TIME
AUTO CAL
ESCAPE
BUMP PARAMETER
