OX-04 Operator’s Manual
Chapter 4: Display Mode
•
31
User IDs can only be selected in this menu item. In order to edit the 128 user IDs, you must use
the 04 Series Datalogging Program or 04 Series Setup Program.
1. After entering Display Mode, press and release POWER MODE until the
USER ID
screen
sequence appears.
2. To change the User ID, press and release AIR. The current User ID flashes.
3. Use AIR to scroll to the desired User ID.
4. Press and release POWER MODE to save the User ID and return to the
USER ID
screen in
Display Mode.
Changing the Station ID (STN ID)
This screen only appears if
DISP.SET
in User Mode is set to
ON
(factory setting) and if
ID DISP
in Maintenance Mode is set to
ON
(factory setting is
OFF
).
Use this screen to select a station ID from the 128 station IDs that are stored in the OX-04’s
memory. Before a station ID is selected on a brand new instrument, the station ID is
“----------”. The factory-installed station IDs have a “S_ID_XXX” format.
The station ID provides a way to identify the OX-04 location during a data logging session.
User IDs can only be selected in this menu item. In order to edit the 128 user IDs, you must use
the 04 Series Datalogging Program or 04 Series Setup Program.
1. After entering Display Mode, press and release POWER MODE until the
STN ID
screen
sequence appears.
USER
ID
U_ID_001
USER
ID
CHG / AIR
USER
ID
NO /MODE
USER
ID
U_ID_001
STN
ID
S_ID_001
STN
ID
CHG / AIR
STN
ID
NO /MODE
