Key Switch
Insert the key in to the right side of the tiller control (Fig. 6). Turn the key and the LED
bars will light up, (type A), the needle will move into the green segment (type B). There is
a delay before the thumb lever control can be operated, while the controller is checking
the circuits.
Horn
Press the yellow horn button to sound the horn.
Thumb Lever Controls
Located at the rear of the tiller (Fig. 6). The left thumb lever controls the reverse and the
right thumb lever controls the forward motion. The amount of pressure applied to each
lever will determine the speed the scooter will travel at. Release the lever and the scooter
will slowly come to a stop and the magnetic brake will be applied.
STARTING TO DRIVE YOUR SCOOTER
Getting started
Select a level area with plenty of space.
Moving Off
Ensure that you are seated comfortably. Turn the key to the on position. Your speed
setting should be on 1 or 2. Press your right thumb lever, the scooter will move forward
slowly. The harder you press the faster the scooter will go but will only reach the speed
level that has been selected. Release the lever and the scooter will decelerate before the
magnetic brakes are automatically applied.
