TRANSPORT AND STORAGE
The RMA Whisper is designed to fold easily for storage and transportation even in the
smallest of vehicles. No tools are required.
1.
Turn off your scooter.
2.
Remove the basket.
3.
Unscrew the hand knob and remove the seat as previously described.
4.
Remove the seat post and take out the height adjustment pin.
5.
Lift off the rear chassis cover with the built in battery pack using the handles.
6.
Fold down the tiller by releasing the tiller hand knob at the front.
7.
Unclip the carry stay from the rear of the tiller and place in the square seat post
tube.
8.
Place the height adjustment pin through the holes in the seat post and the loop of
the carrying stay. Secure the pin by fitting the U -spring to either end of the pin (Fig. 7).
9.
The scooter can now be lifted usin g the natural handle formed by the tiller and
the chrome handle at the rear.
The RMA Whisper is now separated into three sections, the chassis cover with integral
battery pack, the seat and the main body. To reassemble the scooter, reverse the above
procedure.
