17
Assembly
Operating manual neoTower® Premium L / 03.2017
4.3.3 Positioning the generation unit
D
ATTENTION!
Risk of damage to the generation unit caused by improper
transportation.
In narrow transportation routes, it may be necessary to
disassemble parts of the generation unit in order to move
the device into the installation location. The parts may
only be disassembled following consultation with the
manufacturer.
A
Contact the manufacturer.
A
Only dismantle the generation unit in accordance with
the manufacturer’s instructions.
A
Select a suitable installation location. When doing so,
pay attention to the distances between the generation
unit and the system components and equipment.
D
“4.2.2 Premises” (page 13).
A
Position the base plate vibration-damping matting.
A
Place the generation unit on the base plate vibration-
damping matting.
A
Ensure that the generation unit stands level.
A
Screw on the front cover.
4.3.4 Screwing the control cabinet in position
A
Open the control cabinet.
A
Mark the drill hole positions on the wall.
A
Drill the holes for the screws.
A
Screw the control cabinet onto the wall.
