25
Assembly
Operating manual neoTower® Premium L / 03.2017
4.3.7 Connecting the temperature sensors
T1
T2
T3
T4
A
Attach four temperature sensors (T1-T4) to the buffer
tank. When attaching, bear in mind the number of buffer
tanks.
D
“12.1 Hydraulic diagrams” (page 36).
A
Connect a temperature sensor (T5) to the supply line of
the heating circuit.
D
“12.1 Hydraulic diagrams” (page 36).
A
Guide the cables from the temperature sensors (T1-T5)
to the control cabinet.
4.3.8 Connecting the modem
When connecting the modem, the following points must be
observed:
B
If the modem is subjected to high temperatures (e.g. if it
is placed inside the control cabinet), it may not function
properly.
B
The length of the connection cable between the control
cabinet and the modem must not exceed 50 m.
A
Install the modem near to the control cabinet.
A
Connect the modem:
B
Insert the antenna in slot “GSM main”.
B
Insert the connection cable in slot “LAN 1”.
Modem manual.
