33
Service repairs
Operating manual neoTower® Premium L / 03.2017
9.2
Fault resolution
D
WARNING!
Hazard caused by failing to observe the error messages.
Malfunctions indicate faults with the system or incorrect
settings in the control mechanism. Malfunctions must
be rectified immediately to prevent further subsequent
damage.
A
Rectify all faults immediately.
System malfunctions are displayed by the control
mechanism in the operational display.
“RMB/Control” operation manual.
In the case of malfunctions that cannot be resolved using
the control mechanism:
A
Initiate remote maintenance.
A
Follow the manufacturer’s instructions.
9.3
Repair
D
WARNING!
Risk of injuries caused by faulty components.
This chapter contains important information regarding the
safe repair of the system.
Defective components can cause additional subsequent
damage to the system.
A
Read this chapter carefully before performing repairs on
the system.
A
Defective components must be replaced promptly.
A
The system must be taken out of operation until any
safety-related parts have been replaced.
A
Wait for the system to cool down before replacing any
components.
A
Only use components authorised by the manufacturer.
Repair work must only be performed by trained personnel.
Electrical work must only be performed by qualified,
skilled electricians.
D
“2.2.3 Trained personnel” (page 6).
A
Switch off the system.
Operation manual “RMB/Control”.
A
Switch off the master switch.
A
Replace any faulty components.
