8.4.1. Dark Mode
Each of the three front panel illumination sections can be switched off if they are not required.
To turn off illumination on the device:
1. Open the
visual feedback
tab in the
STATE
section.
2. Change any of the following:
a.
Power
to
off
to turn off the standby switch ring illumination.
b.
Meters
to
off
or
Dim
to turn off or dim channel label backlight.
c.
Display
to
off
to turn off the display.
When any item is turned off, a notification (orange) is shown in the
STATE
section.
To turn panel illumination back on:
1. Open the same menu and set the corresponding switches to
to
On
.
To turn the front panel lighting on temporarily, just rotate or push the encoder. The panel
will turn back off after five seconds.
RME M-32 DA Pro User’s Guide
8.4. Front Panel Illumination |
30
