manualshive.com logo in svg

RMS Communications S800N, User Manual

The RMS Communications S800N User Manual is available for free download at 88.208.23.73:8080. This comprehensive manual provides detailed instructions on optimizing the features and functionality of the S800N, ensuring users have a hassle-free experience with this top-of-the-line product.

Share
Download
background image

S800N                                              RMS 

                
                  www.rmscommunications.net 

11 

6.6. Faults test 

Disconnect the test leads and station equipment, 

ensure the cable for test do not have power, use the 

QMS800N to do auto test first, if can not get the result, 

please use manual test. 

6.7. Location 

According to the test results, judge the general location 

firstly, and then according to the true situation, open the 

distributor box to confirm the location sit.   

 

7. Auto Test 

Press  ON/OFF  key to pen the test, connect the test 

leads with the tester and the cable for test, press Auto, 

the test result will appears 

Note: the default VOP setting in the tester is 200m/μS, 

when do auto test, operators should confirm whether 

this VOP is OK or not, Please refer to the following 

description of how to modify the VOP. 

 

 

8. Manual Test 

Below the screen display the current settings and 

parameters, press SET  to modify the current settings 

and parameters. 

Summary of Contents for S800N


















Reviews:

No comments

Related manuals for S800N

Datalogic CBX100 User Manual preview
CBX100
Brand: Datalogic Pages: 8
Timeguard TRT049 Operating & Installation Instructions preview
TRT049
Brand: Timeguard Pages: 5

Brands by name

Popular brands

Load more brands