Accessories Supplied With Each Relay
Self threading M4 mounting screws
M4 terminal screws with captured lock washers
Storage & Handling
If damage has been sustained a claim should immediately be made against the carrier, also
inform Relay Monitoring Systems Pty Ltd and the nearest RMS agent
When not required for immediate use, the relay should be returned to its original carton and
stored in a clean, dry place.
Relays which have been removed from their cases should not be left in situations where they are
exposed to dust or damp. This particularly applies to installations which are being carried out at
the same time as constructional work.
If relays are not installed immediately upon receipt they should be stored in a place free from
dust and moisture in their original cartons.
Dust which collects on a carton may, on subsequent unpacking, find its ay into the relay; in damp
conditions the carton and packing may become impregnated with moisture and the de-
humidifying agent will lose is efficiency.
Visit
www.rmspl.com.au
for the latest product information.
Due to RMS continuous product improvement policy this information is subject to change without notice. User_Guide-4/Iss E/25/08/08