5
Component Description
The Base Assembly is made up of several components as described below:
Casters.
These are the wheels on which the PAL moves. The front wheels
are rigid and the back wheels are swivel and locking casters to facilitate
movement of unit.
Main Frame.
This is the rectangular piece that is fixed to the casters. The
main frame is made up of several components:
Stabilizing Arms.
These arms pull out to level the unit and should always
be engaged when the unit is in use.
Housing.
ABS Plastic covering to cover main frame components from
weather. Needs to be in place prior to installing the mast assembly.
Handle.
Connects to the Main Frame through openings in the housing.
Control Box.
Forms the bottom of the control console; this unit controls the
mechanical operations of the lift. Three wire leads connect to the rear of the
Control Box. The largest receptacle is the connection for the Hand Control.
The connector next to the hand control connector, marked number 1, is the
receptacle for the Actuator lead. The connector next to the actuator connector,
marked number 2, is the receptacle for the 24-volt motor lead.
PAL
PRODUCT COMPONENTS