Rhein-Nadel Automation GmbH
14
VT-BA-ESK2002_EN-2020 / 06.05.2020 SJ
5.4.
Description of individual codes for controller programming
Settings for channel 1
In this sub-menu you can set or limit the following functions for channel 1:
- Vibrating amplitude
- Signal direction of external enabling input
- External enabling
- Soft start and stop delay
Settings for channel 2
In this sub-menu you can set or limit the following functions for channel 2:
- Vibrating amplitude
- Signal direction of external enabling input
- External enabling
- Soft start and stop delay
- Selection of vibratory feeder or belt feeder
Settings for channel 3
In this sub-menu you can set or limit the following functions for channel 3:
- Vibrating amplitude
- Signal direction of external enabling input
- External enabling
- Soft start and stop delay
- Selection of vibratory feeder or belt feeder
Sealing a setpoint
In this sub-menu you can lock the setpoints (vibrating amplitude) of the main menu. It is no longer possible
to change the setpoints for channel 1, channel 2 and channel 3 in the main menu. This avoids accidental
changes to performance parameters. You can only make any changes now through codes C001, C002 and
C012.
Setting the sensor input 1
This is the sub-menu for activation of sensor input 1. In addition you can set the following functions:
- Invert input signal direction
- Start delay
- Stop delay
Setting the sensor input 2
This is the sub-menu for activation of sensor input 2. In addition you can set the following functions:
- Invert input signal direction
- Start delay
- Stop delay
Choosing the sensor links
In this sub-menu you can link the sensors activated by codes C004 and C005 with one another.
Setting the cycle watchdog
Here you can set which sensor input is to be monitored and how the controller is to react to an error.
Show status
This sub-menu serves for checking of the set vibrating frequency and of the sensor inputs.
Calling-up the software version
Definition: 411. 57. 10. 23.11.99
Date
Version No.
Device type
Internal No.
Device type:
59 = ESK 2001
58 = ESG 2001
57 = ESK 2000
56 = ESG 2000
Saving parameters
Open this sub-menu for saving the (application-specific) settings previously made in various sub-menus.
Inhibiting all setting functions
With the aid of this code you can disable all input facilities of the controller. It is no longer possible to
change any values. The only way now to enable the menu again is through this code.
Retrieving parameters
Inn this sub-menu you can return the controller to the default settings. You can also return to application-
specific settings, if previously saved.
KANAL l
KANAL 2
CODE
KANAL l
KANAL 2
CODE
KANAL l
KANAL 2
CODE
KANAL l
KANAL 2
CODE
KANAL l
KANAL 2
CODE
KANAL l
KANAL 2
CODE
KANAL l
KANAL 2
CODE
KANAL l
KANAL 2
CODE
KANAL l
KANAL 2
CODE
KANAL l
KANAL 2
CODE
KANAL l
KANAL 2
CODE
KANAL l
KANAL 2
CODE
KANAL l
KANAL 2
CODE
