Rhein-Nadel Automation GmbH
6
VT-BA-ESK2002_EN-2020 / 06.05.2020 SJ
3.
Product information
3.1.
Characteristic features
The compact controller is designed for operation of a combination of bowl feeder, linear feeder and hopper. Channel 1
is provided for connection of a vibratory feeder, channels 2 and 3 for connection of vibratory feeders or belt feeders.
You can also connect two sensors for accumulation and level monitoring, allowing you to operate a complete feeding
system using the controller. Of course, other combinations are possible as well, e.g. three independently controlled
linear feeders. Any belt feeders connected must be equipped with an AC capacitor motor.
Controller type ESK 2002-10 is rated for a total current of 10 A, and controller type ESK 2002-16 for a total current of
16 A. The unit offers the following characteristic features:
•
Three power outputs:
o
Channel 1 bowl feeder max. 10A, variable
o
Channel 2 linear feeder max. 4A, variable
or AC capacitor motor max. 3A, not variable
o
Channel 3 linear feeder max. 4A, variable
or AC capacitor motor max. 3A, not variable
•
Two sensor amplifiers with independently adjustable timers (On/Off delay).
•
External enabling inputs 24 VDC
•
Two relay outputs and four optocouplers for status messages and other links.
•
Membrane keypad for setting and changing the operating parameters in the set-up menus.
•
Plug-type connections for
o
Bowl feeder
o
Linear feeder
o
Hopper
o
Sensors
o
Communication with higher-level controller
•
Bipolar main disconnect switch.
3.2.
CE conformity
The controller is compliant with the following standards:
EC EMC Directive 2014/35/EU
EC Low-Voltage Directive 2014/30/EU
Applied harmonised standards:
DIN EN 60204, part 1
EN 61439-1