7
Mode 4
– Aux Mode- enables an external device such as an MP3 player or
mobile phones (as a playback device) to be connected to the Duo-Comm 2.
The headset microphone will be disabled in this mode. Please note that the
volume setting of the external device is used when in Aux Mode so please
ensure the volume levels are low on the device before connecting to the
Duo-Comm 2.
Adjust each volume control to suit your needs. The supplied headset
features an in-line volume control located around 350mm (14 inches) from
the headset. This in-line volume control varies the volume level from the
Duo-Comm 2. Please ensure that the rotary dial on the in-line volume
control is set roughly to a middle position before testing the volume level
using the volume control on the Duo-Comm 2. If you cannot hear any audio
from the headset it is likely that this rotary dial requires further adjustment.
To increase the volume, the rotary dial must be rotated clockwise. To
decrease the volume the rotary dial must be rotated anti-clockwise.
Please test the headset microphone volume by ringing a friend or colleague
so that they can tell you if the microphone volume needs adjusting. Try to
avoid high levels of volume on the microphone, as this may be
uncomfortable for the person listening to you.
Product features
The Duo-Comm 2 enables you to listen to music, audio described books or
audio from movies via the computer. The Duo-Comm 2 can also access
communication software such as SKYPE when in Computer Mode.
Most commercially available headphone/microphone headsets featuring 3.5
mm stereo sockets are compatible with the Duo-Comm 2.
Technical specification
•
6 volt (centre positive) - 1300ma Regulated supply.
•
Amplifier output 150 mW
•
Energy consumption (not yet confirmed)
It is recommended that the Duo-Comm 2 power supply is connected directly
into a mains socket. Using an extension lead to power the Duo-Comm 2
can degrade sound quality during use. Please note that placing mobile
phones or similar devices close to the Duo-Comm 2 can also affect sound
quality.