8
7 | PAIR TO YOUR
BLUETOOTH
®
ENABLED DEVICE
Before you use your headset for the first time you must pair the unit with a BLUETOOTH
enabled device. Pairing is a one-time process and rquired only for the first connection with
the BLUETOOTH enabled device. RKING940 can be paired with up to eith devices and
can be connected simultaneously with two devices.
General procedure:
1. Keep RKING940 within range of a BLUETOOTH enabled device
(no more than 3 feet).
2. The headset must be turned off.
3. Hold the On/Off button for approximately 5 seconds until you hear power on and
the indicator light intermittently flashes Red and Blue. The device is now in pairing
mode. The first time the headset is turned on, pairing mode should engage
automatically.
4. Find the BLUETOOTH settings and search your device list.
5. From the device list, select “RKING940”
6. If required, enter the PIN code “0000” and confirm the entry. If the connection was
successful, you will hear the voice prompt “connected” and the indicator lights
Blue for 1 seconds. (Note: The PIN code is preprogrammed and cannot be changed.)
