KIT# 921-3
07/31/13
KS
All illustrations and specifications contained herein are based on the latest information available at the time of publication approval.
ROADMASTER, INC. reserves the right to make changes at any time without notice in material, specification and models or to discontinue models.
1.
Important:
please use all supplied bolts and parts and read all instructions carefully before beginning this
installation. The majority of questions you may have can be answered within the text, and proper installation will
ensure safe and secure travel.
Now, begin the installation by removing six plastic fasteners attaching the corner of the
fascia to the corner of the fender (Fig.C).
2. On each side, remove one plastic fastener attaching the bottom of the fender liner to the fascia (Fig.D).
3. On each side, remove three plastic fasteners attaching the bottom of the fender liner to the fascia (Fig.E).
Note:
the
approximate location of the second and third fasteners are
also noted.
4. On each side, remove one 13mm (head) bolt and two
plastic fasteners attaching the splash shield and fascia to
the core support (Fig.F).
5. Pull back the fender liners and disconnect the fog
lights, if the vehicle is so equipped. Pull out and forward on
the corners of the fascia to remove it (Fig.G).
6. On each side, remove four 12mm (head) bolts attach-
ing the bumper core to the frame rail. The bumper core will
not be replaced.
Note:
retain the bumper core and attach-
ment hardware so that it can be replaced if the bracket is
ever removed.
Fig.C
Fig.D
Fig.E
Fig.F
Fig.G
BASEPLATE KIT
INSTALLATION INSTRUCTIONS
ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 360-896-0407 fax 360-735-9300 www.roadmasterinc.com
