LTS-
100DS User manual
5
3 Instructions for use
3.1 SIM card installation and device start up
3.1.1 Open the packing box and check whether the device model is correct and the accessories are
complete. Otherwise, please contact your dealer.
3.1.2 SIM card selection, the device needs to insert a GSM SIM card, GSM card Unicom or mobile
optional (Global GSM network)
3.1.3 Installation of the SIM card, disassemble the device waterproof plug, according to the label, insert the
SIM card chip downwards into the card slot, and put on a waterproof plug.
Note:
(1) The card is automatically turned on;
(2) The device SIM card needs to enable the GPRS function;
(3) The equipment SIM card needs to enable the caller ID display function (open or not open according to
the function required by the customer);
(4) If your SIM card is turned on and you are asked to enter your SIM PIN, please refer to your phone's
user manual to switch the SIM PIN feature off;
(5) Please make sure the equipment SIM card has a fee.
(6) To avoid burglar damage, equipment selection should be concealed as much as possible;
(7) Avoid placing with sources, such as reversing radars, anti-theft devices and other telematics equipment;
(8) The device has a built-in GSM antenna and a GPS antenna. It should be installed face up (towards the
sky) and there should be no metal shielding shielding.
3.2 Device LED light status
3.2.1 Red light - charging indicator
The status of the light
Meaning
Long bright
Charging / normal work
not bright
Charging full/off
3.2.2 Yellow Lights - GSM Indicatorss
The status of the light
Meaning
Flash once in 2 seconds
GSM initialization
Long bright
GPRS communication is normal/already online
not bright
GSM dormancy
3.2.3 Blue light - GPS indicator
The status of the light
Meaning
Flash once in 2 seconds
GPS signal search
Long bright
GPS has been positioned
not bright
GPS sleep
