LTS-
100DS User manual
8
When the master control number or specific number sends this command to the device SIM card
number, the device dials back the phone to implement the monitoring function.
Note: To realize this function, you must first set the master control number and SOS specific number.
3.8 Vibration alarm
3.8.1 Turn on vibration SMS alarm: 125#
Reply: OK
3.8.2 Turn off the vibration SMS alarm: 126# (default)
Reply: OK
3.8.3 Turn on Vibrating Telephone Alarm: 122#
Reply: OK
3.8.4 Turn Off Vibrating Phone Alarm: 121# (default)
Reply: OK
3.8.5 Set vibration alarm duration SMS command, 1-15 seconds.
Command: vibtime123456,n Reply: vibtime set ok
n(0~15), 0 cancels vibration alarm, default is 3 seconds, ie vibration lasts 3 seconds
3.9 Displacement alarm
Displacement alarm setting instruction: move123456 300 (default) unit: m Reply: move ok
Cancel the displacement alarm instruction:nomove123456 reply:nomove ok
3.10 Electronic fence
This function is set on the mobile phone APP or on the monitoring platform.
3.11 Speeding alarm
Speeding SMS alarm speed limit: speed123456 080 Setting speed limit 80 km/h
3.11.1 Turning off Speed SMS Notification: speed123456 000 (default) Reply: speed ok
3.11.2 Open Speed Message Notification: speed123456 080 Re: speed ok
3.12 Low-power alarm
When the power of the device is low, a message will be sent: "Your device is low, please charge it in
time" to the master control number.
3.13 Sleep power saving mode setting
3.13.1 Single Operation Mode
Command Format: DW05 Re: Gps Time Set OK
