background image

LTS-

100DS User manual

5

3 Instructions for use

3.1 SIM card installation and device start up

3.1.1 Open the packing box and check whether the device model is correct and the accessories are
complete. Otherwise, please contact your dealer.
3.1.2 SIM card selection, the device needs to insert a GSM SIM card, GSM card Unicom or mobile
optional (Global GSM network)
3.1.3 Installation of the SIM card, disassemble the device waterproof plug, according to the label, insert the
SIM card chip downwards into the card slot, and put on a waterproof plug.

Note:

(1) The card is automatically turned on;
(2) The device SIM card needs to enable the GPRS function;
(3) The equipment SIM card needs to enable the caller ID display function (open or not open according to
the function required by the customer);
(4) If your SIM card is turned on and you are asked to enter your SIM PIN, please refer to your phone's
user manual to switch the SIM PIN feature off;
(5) Please make sure the equipment SIM card has a fee.
(6) To avoid burglar damage, equipment selection should be concealed as much as possible;
(7) Avoid placing with sources, such as reversing radars, anti-theft devices and other telematics equipment;
(8) The device has a built-in GSM antenna and a GPS antenna. It should be installed face up (towards the
sky) and there should be no metal shielding shielding.

3.2 Device LED light status

3.2.1 Red light - charging indicator

The status of the light

Meaning

Long bright

Charging / normal work

not bright

Charging full/off

3.2.2 Yellow Lights - GSM Indicatorss

The status of the light

Meaning

Flash once in 2 seconds

GSM initialization

Long bright

GPRS communication is normal/already online

not bright

GSM dormancy

3.2.3 Blue light - GPS indicator

The status of the light

Meaning

Flash once in 2 seconds

GPS signal search

Long bright

GPS has been positioned

not bright

GPS sleep

Summary of Contents for LTS-100DS













Reviews: