LTS-
100DS User manual
6
3.3 Equipment charging
Each time the device is charged, charge it for more than 20 hours. Please use the original charger and
battery.
Note:
(1) The battery of this product contains chemical components. Please do not use force to beat, prick and
put into fire
(2) Please charge in time to ensure the normal operation of the equipment.
3.3 Master Control Number Settings
3.3.1 The master number can only be bound to one, and the last bound master number is valid.
3.3.2 The default master control number password is: 123456;
3.3.3 The command to set the master control number is: admin123456 13712345678 reply: admin ok;
3.3.4 modify the master control number password command: password123456 666888 (666888 for the
new password) Reply: password ok.
Note: The GPS TRACKER sets the parameters via SMS. The master control number sends the SMS code
to the device's SIM card number. The separated symbol is a comma. The comma in the following function
parameter setting instruction format is the English input state format.
3.4 Google Links
SMS inquiries latitude and longitude information, any number to send instructions to the device, will reply
latitude and longitude to the mobile phone number
Instruction format: g1234
Note: In the location query, when the GPS signal is not good, the received latitude and longitude
information is the place where the GPS signal was received in the longitude and latitude. If there is a
deviation from the location, it is necessary to pay attention to the time information contained in the latitude
and longitude information.
3.5 Base Station Positioning (Main Control Number Transmission Valid)
Turn on the base station positioning command: jz=1 Reply: OK
Turn off the base station positioning command: jz=0 (default) Reply: OK
3.6 Chinese Address Search
When it is necessary to query the Chinese location information of the device, a location query short
message can be written and sent to the device's SIM card, and the device can reply to the last location
information.
SMS command: 123
Note: Chinese address reply requires monitoring platform support.
